Видео

Why are you spraying acetone in the direction of the car? You know that can strip the paint, right?

Did you replace it with a OEM starter?

Nice '72 SS !

I was just opened that thing, pulled that thing out, changed that thing and done!!!! Thanks a bunch 😁 btw got stopped by an officer 👮‍♂️ but everything is good now yea

Thank you for this video! My wife and I did this last night no way my hands were gonna squeeze in there. We have a 2010 fusion that had intermittent ac issues this did the trick Instant cold air 🙏 . I would suggest using a multi tool to cut the first tab and back panel to prevent sharp edges and cutting yourself when squeezing your hands in there. Stick your phone in and take pictures of the sensor as reference points cause your doing this pretty blindly also to make sure the sensor is properly seated afterwards my wife made it look easy.

Thanks bro! This was a helpful and straightforward demonstration.

Just remove the air valve. Drive forward slowly a couple feet. The bead breaks. Done

Cool share. I have an 09 hhr ss. I think its a real sleeper 😴. Saab tranny. Wtheck

I tried swapping but still don’t work I turn on the ac the buttons light up but no air ac clutch is not locked up could it be the blower motor or do I need to check the Freon first ?

Thanks man!

I want 1 so bad but they are still going for too much....anything over $5K is too much

Thanks!

Amazingly detailed step by step video - great video and all tool sizes. Thank you!

nice thanks

Very simple instructions and hopefully It'll work on my 2007 hhr this weekend

Very good Video I will remove one of those tomorrow 😁👌

Thanks very much for your video instruction. When the battery light turns on while driving, The problem can be bad battery or bad alternator if the wiring is fine. After checking the battery voltage when the engine is off and when the engine is on, battery voltage is below 12V, the problem must be the alternator because my battery is new. It takes half a day to replace my alternator. Here are a few difficult things that I encounter: 1. To remove the fan, remove two 10mm top nuts and loosen two 10mm bottom nuts. To get access to two bottom nuts, I jack up the car and remove the bottom bra. 2. It is almost impossible to disconnect the fan power connector. I remove the tie of the wiring harness from the bottom then push the power connector up so I can push the connector tab. 3. The tensioner operates by hydraulic. I use breaker bar to push the tensioner bolt (19mm) toward the firewall slowly while removing the drive belt. I don't remove the belt completely from the pulleys, but after working with the alternator for a while, the belt slips off. I need the drive belt routing diagram to reconnect the belt after mounting the new alternator. 4. The width of the the flange of the new alternator where the bottom bolt goes through is slightly bigger than the old alternator. I use a hammer to reduce the width so it can fit into the slot. Testing: I turn on the engine, the battery light is no longer lit. I put the battery under heavy loads (air conditioner, headlights, loud speakers, ...) and measure the battery terminal voltage. It is 14.6V; so, the alternator is working. When the engine is hot enough, the fan turns on; so, the fan wiring is OK. The rebuilt alternator from B&J costs CAD $400 including core deposit CAD$ 95.00. The labour saving is CAD$180.00. It might not be worth the trouble, but surely I have fun.

Do you have a link to the part you used? My 2010 Soul is giving me this same code and I suspect it is the sensor, as I recently had a lot of EVAP-related repairs a few months back.

You did a good job. Sand a lot before primer then use a primer / surfacer high build and apply 3 coats and finish with 800 grit. That should fill in the clear coat marks

Hi there, just wanted to thank you for this video. I did as you suggested on my wife’s 2009 Pilot and it turned out to be the relay. Had an appointment at the shop for Monday that I’m going to cancel. Thanks again!

Im sold.

Locking the ratchet was a good tip

Hi there, I was wondering where you buy your parts from thank you

Music to my ears🎶lets go for a ride! I'll ride shotgun! Don't worry, im a girl😂

All the gear and no idea!! That is absolutely atrocious dude.

LED bulbs are NOT LEGAL, none are DOT approved, nor are they designed to be used in older headlamps as they can't be aligned properly! They generally say FOR OFF ROAD USE ONLY to skate the legal ramifications. Message to anyone with these coming at you on the road, return the favor and put your high beams on and blind them until they drive by.

I've owned 4 elements. I still love and want one again but the best SUV ever is my Toyota land cruiser. sorry not sorry

I've never seen a Kawasaki like that.❤

Both look nice, but the kaw is the better looking of the two.

Ok if the compressor is running and it’s not the relay, what’s the next thing to check?

Straight to the point and just what I needed, W video

Thank you for the quick tutorial on the stepper motor brake adjustment thing with the torx. Love how your kid is with you keep it up awesome to see

Put a meter on the wire before opening up all the wire. Could save you some headache. ;)

Do I need grease?

Awesome video ! If it Starts hard and almost stalls at stop sign rough idle but runs great other then that what is it????

Guy must work at one of those buy here pay here ez credit car lots.

that was useless

That's so friggin easy.

🔥

Absolutely goated video. Just fixed the clunking noise on my Elantra. Took a couple of hours, spent 8 bucks and not the 200 mechanic quote.

Would this be the same on a 2012?

My mothers car needs this replaced I’ll be doing this job Sunday shouldn’t take much time great video

Hey thanks man. It really worked on my 2013 Toyota Corolla

Thank you so much for the update. Indeed, the website does not work! So yes, call your local honda dealership, and they will provide the code for you! I just got my code. Thank you again for this video!

I REPLACED MY STEERING COUPLER AND IT WORKS GREAT, YOU TEACH STEP BY STEP GREAT JOB.

Showing me this could be done without taking the wheel off was all I needed to see!🙏🏿

thanks man

First video that mentions that tool avail for rent excellent thanks man!!! Also at what mileage should the belt be changed please?

I hate Nissans